|
Sunday, 23 November 2008 12:31 |
|
|
IMPORTANT INSTALLATION INSTRUCTIONS
|
|
1.
|
Disassemble rods and thoroughly clean (including bolt and beam threads) to remove rust preventative.
|
|
|
|
|
2.
|
Apply ARP Moly lube to the threads and under the head of each bolt.
|
|
|
|
|
3.
|
Install rods by bringing cap and beam into alignment. Tap into place before installing bolts (DO NOT USE BOLTS TO PULL CAPS INTO POSITION) Each rod is numbered and MUST be assembled with the same number on cap and beam.
|
|
|
|
|
4.
|
Sequentially torque bolts to specified torque NOT TO EXCEED maximum specification for stretch.
|
|
|
|
DESCRIPTION
|
RECOMMENDED
TORQUE
|
NOT TO EXCEED
STRETCH
|
|
5/16" x 1.500" ARP 2000 cap screw
|
26 ft./lb w/ARP moly
|
(.0056" stretch)
|
|
3/8" x 1.600" ARP 8740 cap screw
|
45ft./lb w/ARP moly
|
(.0047" stretch)
|
|
3/8" x 1.600" ARP 2000 cap screw
|
50ft./lb w/ARP moly
|
(.0058" stretch)
|
|
3/8" ARP 8740 Wave Loc bolt & nut
|
50ft./lb w/ARP moly
|
(.0063" stretch)
|
|
7/16" x 1.400" ARP 8740 cap screw
|
64ft./lb w/ARP moly
|
(.0046" stretch)
|
|
7/16" x 1.500" SCAT 2001 cap screw
|
63ft./lb w/ARP moly
|
(.0050" stretch)
|
|
7/16" x 1.600" ARP 8740 cap screw
|
63ft./lb w/ARP moly
|
(.0050" stretch)
|
|
7/16" x 1.600" ARP 2000 cap screw
|
70ft./lb w/ARP moly
|
(.0062" stretch)
|
|
7/16" x 1.800" ARP 8740 cap screw
|
63ft./lb w/ARP moly
|
(.0060" stretch)
|
|
7/16" x 1.800" SCAT 2001 cap screw
|
63 ft./lb w/ARP moly
|
(.0060" stretch)
|
|
Contact Strokerkits.com | Support | Services
